Máy bơm astral 1HP 1pha

Self - priming single - stage centrifugal pumps with prefilter. Completely silent. 1.0 HP. - 200V - 0.75 KW. - 16.9 M3 / H Applications: Recycling and filtering of water in medium and large pools.

Materials: Pump body, pump foot and diffuser in tecnopolimer. Impeller in technopolymer. Seal mounting in technopolymer. Motor shaft in stainless steel AISI 420. Mechanical seal in graphite and alumina. Aluminum engine housing. NBR seals.

Features pool pump Espa Silen 100 M.

Pump 1 CV., MONOPHASE Single-stage centrifugal self-priming, with prefilter. Completely silent. The materials used are of the highest quality, subject to strict controls and verified with extreme rigor. Materials:

Pump body, pump foot and diffuser in tecnopolimer. Impeller in technopolymer. seal mounting in technopolymer. Motor shaft in stainless steel AISI 420. Mechanical seal in graphite and alumina. aluminum engine housing. NBR seals.

Motor:

Asynchronous, two poles Protection IP 55 Insulation class F continuous service. Single phase version built-in thermal protection.

What applications does the pump for pools Espa Silen 100M?

Recirculation and filtration of water in medium and large pools. Ideal for pools with 600 mm diameter filter.

Pumps for pools espa are single - cell centrifugal pumps with built -in filter elements, especially designed for prefiltering and recirculation of water in swimming pools.

They are designed to work with clean water and maximum temperature of 35 ° C.

Prior to the initial startup of the pool pump controls:

you have made the connections that are defined in the preceding paragraph, unscrew the relevant filter cover and fill with water the pump basket to the lower level of the suction tube.

Check that the pump shaft turns freely. Check that the voltage and network frequency correspond to those specified in the nameplate of the pump. Replace the pre-filter cover in place and screw it to convenience. Check that the direction of the motor rotation matches the indicated on the fan cover. In three-phase motors, if the direction of rotation is incorrect reverse two supply phases on the protection panel. If the engine does not start, try to discover the anomaly through the list of most common faults and their possible resolutions in later pages. NEVER OPERATE THE PUMP DRY.

Commissioning of the pump for pools Espa Silen 100M. Open all gate valves and voltage to the motor. Wait a reasonable time for the self-priming of the pipe is made. Check the current absorbed and properly adjust the thermal relay.

Maintaining the pump for pools Espa Silen 100M.

The pool pumps do not require any specific maintenance. It is however recommended to periodically clean the pump filter, empty the pump casing during periods of low temperatures through the drain plug. If the inactivity persists is advisable to drain water pump, clean it and place the cover filter with petroleum jelly on the rubber gasket, making sure that the place where will be stored will remain dry and ventilated. In case of failure, the user should not manipulate the pump. Contact an authorized service center. Time to dispose of the pump, it contains no toxic or polluting material.

 

PUMPS POOL ASTRAL

THÔNG TIN LIÊN HỆ CỦA CÔNG TY

CÔNG TY TNHH SẢN XUẤT THƯƠNG MẠI NGÔ GIA PHÁT

Giấy CNĐKKD: 0312892690 – Cấp ngày: 15/08/2014 

Mã số thuế: 0313943958

Hotline: 0901 846 888 - Ms.Hạnh

Email: [email protected]

Website: https://www.biotechpool.com/

Địa chỉ: Số 130, Cao Đức Lân, P. An Phú, TP Thủ Đức, Tp HCM

---

PUMPS POOL ASTRAL , PUMPS POOL WATERCO , SWIMMING POOL PUMPS